Casio QV-70 Manuel d'utilisateur télécharger pdf (Page 6)

— 4 —

MEMORY RESTORING AND RESET

MEMORY ERROR

"Memory error" (#1 ~ #3) message appears on QV-70 camera, when an error is found in its flash memory. In this

case, the QV-70 is locked up and do not accept any operation except power on / off.

MEMORY ERROR #1

When the memory error #1 occures, press the + button to do the error reset. The following display will be appeared on

QV-70.

ERROR RESET

YES SHUTTER

NO CALL TECH

SUPPORT!

Then press the shutter button. The display should return to normal.

(Refer to owner´s manual for QV-70.)

MEMORY ERROR #2, #3

When the memory error #2 or #3 occures, do the memory restoring.

Notes: 1. When do the error reset or memory restoring, use the AC adaptor.

2. Never turn the power off, while doing the error reset or memory restoring.

MEMORY RESTORING

REQUIRED TOOL

Memory restoring software: Amed.exe

Cable for QV-Link

OPERATION

1. Connect the QV-70 to PC with the cable.

2. Execute the "AMED -PIR" command on MS-DOS, then the following message will be appeared on the PC.

QV series Automatic Memory Error Debugger ver 2.0

Camera type = QV-10A/QV-30 0090:532E

Searching management block ...

Found at bank 1FF status --- OK

Saving management block as "mngblk.dat"

1 2 3 4 5 6 7 8 9 10 11 ... 25 26

Pas de commentaire

Casio QV-70 Manuel d'utilisateur Page 6