Casio EX-S2 Manuel d'utilisateur télécharger pdf (Page 25)

GETTING READY

IMPORTANT!

• It takes about two hours to achieve a full charge. Ac-

tual charging time depends on current battery capac-

ity and charging conditions.

• Use only the USB cradle to charge the special NP-20

rechargeable lithium ion battery. Never use any other

charger device.

• Use only the bundled AC adaptor. Never use any

other type of AC adaptor. Do not use optionally avail-

able AD-C620 and AD-C630 AC adaptors with this

camera.

• Make sure that the camera connector of the USB

cradle is securely inserted into the camera’s connec-

tor as far as it will go.

• The CHARGE lamp may remain amber colored and

the charge operation may not start right away if you try

to charge immediately after using the camera (which

causes battery to become warm) or when it is too hot

or too cold where you are performing the charge op-

eration. If this happens, simply wait until the battery

reaches normal temperature. The CHARGE lamp will

turn red and charging will start when the battery tem-

perature returns to the allowable charging tempera-

ture range.

• The CHARGE lamp flashing red indicates that an error

occurred while charging. An error can be caused by

any of the following: a problem with the cradle, a prob-

lem with the camera, or a problem with the battery or

how it is loaded. Remove the camera from the cradle

and see if it works normally.

• The USB cradle can be used for charging or USB data

communication only.

NOTE

• USB cradle is designed for operation with any power

supply in the range of 100V to 240V AC. Note, how-

ever, that the shape of the AC power cord plug varies

according to country or geographic area. If you plan to

use the cradle in another geographic area, you need

to purchase a commercially available AC power cord

that is compatible with the power outlets in that area.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 62 63

Pas de commentaire

Casio EX-S2 Manuel d'utilisateur Page 25