Casio CW-50 - Disc Title Printer Color Thermal Transfer Guide de l'utilisateur télécharger pdf (Page 23)

Loading and Removing the Ink Ribbon Cassette

You must load an ink ribbon cassette into the printer in order to print.

Important!

• Note that you will not be able to open the disc tray and load the ink ribbon

cassette unless the power cord/AC adaptor and USB cable are both

connected to the printer. See “Connecting to a Power Source and a PC” on

page 19 for more information.

• The carriage is secured in place by packing material to protect it against

damage. Before using the printer for the first time, use the procedure on

page 22 of this manual to remove the packing material.

To load the Ink ribbon cassette into the printer

1. Remove the stopper from the ink ribbon cassette.

2. Insert a pen or other similar object into the ink ribbon cassette’s hub, and

rotate the hub to take up any slack.

• To rotate the hub, it is best to use an object whose surface is not too

smooth.

• If the ribbon is very slack, you may need to rotate the hub a number of

times.

Important!

Loading the ink ribbon cassette while the ribbon is slack can lead to

malfunction.

3. Press the Eject button on the front of the printer.

This causes the disc tray to come out part way.

Important!

Make sure there is nothing in front of the printer to interfere with movement

of the disc tray.

Note

You can also open the disc tray by clicking the button (page 34) on the

DISC TITLE PRINTER application screen.

Stopper

Rotate in the direction of

the arrows.

Eject button

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 79 80

Pas de commentaire

Casio CW-50 - Disc Title Printer Color Thermal Transfer Guide de l'utilisateur Page 23