Casio XW-G1 Manuel d'utilisateur Page 14
- Page / 111
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Send Sent when the mixer part volume is changed.
Receive Receipt changes the mixer part volume.
7.6 Pan (0AH)
Message Format: BnH 0AH vvH
n: MIDI Channel Number
vv: Value(Note1)
Note1 : For information about the relationship between setting values and send/receive values, see “39.3 Pan Setting Value
Table” in “VIII Setting Values and Send/Receive Values”.
Send Sent when the pan of any part is changed.
Receive Receipt changes the pan of the corresponding part.
7.7 Expression (0BH)
Message Format: BnH 0BH vvH
n: MIDI Channel Number
vv: Value
Receive Receipt changes the Expression value.
7.8 General Use Controllers 1 through 8 (10H through 13H, 50H through
53H)
On this Instrument, these messages are used to control DSP operation.
Message Format: BnH 10H vvH DSP Parameter7[1]
BnH 11H vvH DSP Parameter7[2]
BnH 12H vvH DSP Parameter7[3]
BnH 13H vvH DSP Parameter7[4]
BnH 50H vvH DSP Parameter7[5]
BnH 51H vvH DSP Parameter7[6]
BnH 52H vvH DSP Parameter7[7]
BnH 53H vvH DSP Parameter7[8]
n: MIDI Channel Number
vv: Value
Send Sent when the drawbar rotary button is operated or when the sliders to which DSP parameters
A and B are assigned are operated.
Receive Receipt changes the value of DSP Parameter 7 [1 to 8] (7-bit parameter) assigned to the part
specified by the MIDI Channel Number. Any message received that corresponds to the parameter of a
number not being used by the currently selected DSP is ignored. For details about Parameter 7 of each
DSP, see the explanations under “VII DSP Parameter List”.
14
- XW-P1/XW-G1 1
- MIDI Implementation 1
- III System Message 39 3
- V Parameter List 63 3
- VI Parameter Set List 85 5
- VII DSP Parameter List 87 5
- MIDI Message Overview 9
- Channel Message 11
- 7 Control Change 12
- 7.2 Modulation (01H) 13
- 7.4 Data Entry (06H,26H) 13
- 7.5 Volume (07H) 13
- 7.6 Pan (0AH) 14
- 7.7 Expression (0BH) 14
- 7.9 Hold1 (40H) 15
- 7.11 Sostenuto (42H) 16
- 7.12 Soft (43H) 16
- 7.14 Filter Resonance(47H) 16
- 7.16 Release Time (48H) 17
- 7.18 Attack Time (49H) 17
- 7.20 Filter Cut Off (4AH) 18
- 7.23 Vibrato Rate (4CH) 19
- 7.25 Vibrato Depth (4DH) 19
- 7.27 Vibrato Delay (4EH) 20
- 7.37 Reverb Send (5BH) 23
- 7.38 Chorus Send (5DH) 23
- 7.39 NRPN (62H,63H) 23
- 、40H:User) 24
- 、Receive:Ignored) 25
- 7.40 RPN (64H,65H) 33
- 7.41 All Sound Off (78H) 35
- 7.43 All Notes Off (7BH) 35
- 7.44 Omni Off (7CH) 35
- 8 Program Change 36
- 9 Channel After Touch 37
- 10 Pitch Bend 37
- System Message 39
- 15 System Exclusive Message 40
- Messages 43
- 16.2 Basic Message Structure 44
- 16.3 Format of Each Field 44
- 18 Parameter Set Transfer 52
- Protocol Parameter” 58
- Parameter List 63
- 21 Patch Parameter 66
- 21.6 Master Tune Parameter 67
- 21.7 Master Mixer Parameter 67
- 21.8 Part Parameter 67
- 21.9 System Chorus Parameter 68
- 21.10 System Reverb Parameter 68
- 21.11 Patch Etc Parameter 68
- 22 Tone Parameter 69
- 23 Melody Parameter 70
- 24 Drum Parameter 70
- 24.3 LFO Parameter 71
- 25.1 Drawbar Parameter 71
- 26.2 Hex Layer LFO Parameter 72
- 27 Solo Synth Parameter 73
- 27.7 Solo Synth LFO (x2lfo) 78
- 27.8 Solo Synth PWM 79
- 27.9 Solo Synth Total Filter 79
- 28.2 User Wave LFO Parameter 80
- 29 DSP Parameter 81
- 30 All Data Parameter 81
- 31 Step Sequencer Parameter 82
- 33 Arpeggio Parameter 82
- 34 Phrase Parameter 82
- 35 Spec Parameter 82
- ↑ 1 01 00-00-01 0: Mono 84
- ↑ 1 01 00-01-01 0: 21kHz 84
- ↑ 1 01 00-00-01 0: Off 84
- 36.2 XW-G1 86
- DSP Parameter List 87
- 38 DSP Parameter Set Type 88
- 38.3 Solo Synth Distortion 89
- 38.4 Solo Synth Flanger 89
- 38.5 Solo Synth Chorus 89
- 38.6 Solo Synth Delay 89
- 38.13 Tremolo 91
- 38.14 Phaser 91
- 38.15 Flanger 91
- 38.16 Chorus 91
- 38.17 Delay 92
- 38.18 Reflection 92
- 38.19 Rotary 92
- 38.21 LoFi 93
- 38.22 Wah Compressor 93
- 38.23 Wah Distortion 93
- 38.20 Ring Modulator 93
- 38.24 Wah Chorus 94
- 38.25 Wah Flanger 94
- 38.26 Wah Reflection 94
- 38.27 Wah Tremolo 94
- 38.28 Wah Auto Pan 95
- 38.29 Compressor Wah 95
- 38.30 Compressor Distortion 95
- 38.31 Compressor Chorus 96
- 38.32 Compressor Flanger 96
- 38.33 Compressor Reflection 96
- 38.34 Compressor Tremolo 96
- 38.35 Compressor Auto Pan 96
- 38.36 Distortion Wah 97
- 38.37 Distortion Compressor 97
- 38.38 Distortion Chorus 97
- 38.39 Distortion Flanger 97
- 38.40 Distortion Reflection 98
- 38.41 Distortion Tremolo 98
- 38.42 Distortion Auto Pan 98
- 38.43 Chorus Reflection 98
- 38.44 Chorus Auto Pan 98
- 38.45 Flanger Reflection 99
- 38.46 Flanger Auto Pan 99
- 38.47 Reflection Distortion 100
- 38.48 Reflection Chorus 100
- 38.49 Reflection Auto Pan 100
- 38.50 Tremolo Distortion 100
- 38.51 Tremolo Chorus 100
- 38.52 Tremolo Flanger 101
- 38.53 Tremolo Reflection 101
- Part VIII 102
- 39 Setting Value Tables 102
- 39.5 Drawbar Position 設定値テーブル 103
- 39.8 0-3 Setting Value Table 103
- 39.9 0-5 Setting Value Table 103
- MIDI Implementation Notation 110
Produits connexes et manuels pour Synthétiseur Casio XW-G1
Synthétiseur Casio LK-200S Manuel
(58 pages)
(58 pages)
(22 pages)
Synthétiseur Casio PX-300 Manuel
(40 pages)
Synthétiseur Casio PX-300 Manuel
(40 pages)
(40 pages)
Synthétiseur Casio PX-300 Manuel
(41 pages)
(41 pages)
Synthétiseur Casio XW-P1 Manuel
(95 pages)
(95 pages)
Synthétiseur Casio XW-G1 Manuel
(107 pages)
(107 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.223 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels