Casio CT-X5000 Manuel d'utilisateur télécharger pdf (Page 13)

Receive Receipt changes the degree of pitch modulation.

7.18 Vibrato Delay (4EH)

Message Format: BnH 4EH vvH

n: MIDI Channel Number

vv: Value (Note1)

Note1: For information about the relationship between setting values and send/receive values, see the “18.4 –64 - 0 - +63

Setting Value Table” in “VI Setting Values and Send/Receive Values” of this do cument.

Receive Receipt changes the time it takes until note vibrato starts.

7.19 Portamento Control(54H)

Message Format: BnH 54H vvH

n: MIDI Channel Number

vv: Source Key Number

Receive Receipt of this message ﬁrst stores the Source Note Number for the next note. When the next

Note On is received, the portamento eﬀect is applied to the note using this Source Note Number as the

pitch start point and the Note On event key number as the end point. If there already is a note being

sounded by Source Note Number at this time, the new note on is not performed and the portamento

eﬀect is applied to the pitch of the note being sounded. That is to say that legato play is performed.

7.20 Reverb Send (5BH)

Message Format: BnH 5BH vvH

n: MIDI Channel Number

vv: Value

Transmit Sent when mixer part reverb send is operated. Sent when GM tone is selected, when MIDI

setting of Accomp Out set to ON and when automatic accompaniment is used.

Receive Receipt changes the reverb send of the corresponding part.

7.21 Chorus Send (5DH)

Message Format: BnH 5DH vvH

n: MIDI Channel Number

vv: Value

Transmit Send when mixer part chorus send is operated. Sent when Chorus type is selected, when

MIDI setting of Accomp Out set to ON and when automatic accompaniment is used.

Receive Receipt changes the chorus send of the corresponding part.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 32 33

Pas de commentaire

Casio CT-X5000 Manuel d'utilisateur Page 13