Casio IT-10 Manuel d'utilisateur télécharger pdf (Page 13)

Table 1.6 Names of parts

No. Part Name Description

1 IrDA communication

port

Align this port with the IrDA communication port of the terminal for data

transfer via the IrDA interface.

2 Detection switch This switch detects when the terminal is correctly mounted on the Bridge

Satellite Cradle.

“POWER”

Indicates the power status.

Off : Power is off.

Green : Power is on and the terminal is correctly mounted on the Cradle.

Red : Power is on, but the terminal is not correctly mounted on the

Cradle.

“DATA”

Indicates the communication status.

Off : No communication.

Flashing green : Communication between the terminal and a PC is

established.

Red : Connection problem in the Cradle.

“LINE”

Indicates the system status.

Off : The system is not operational.

Status lamp

Green : The system is operational.

4 Power terminals These terminals supply power to the terminal mounted on the Cradle.

5 Power switch Turns on the power on the Cradle.

6 Power adaptor port Connect the dedicated AC adaptor (AD-S42120AE) to this port.

7 RS-422 ports Use these two ports (“C-OUT” and “C-IN”) when connecting up to eight

Bridge Satellite Cradles in series.

8 RS-232C port Use this port when connecting the terminal and a PC via the RS-232C interface.

9 USB port Use this port when connecting the terminal and a PC via the USB interface.

10 DIP switches Use these switches to configure the settings on the Cradle.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 42 43

Pas de commentaire

Casio IT-10 Manuel d'utilisateur Page 13