Casio KL-8100 Guide de l'utilisateur télécharger pdf (Page 22)

E-21

2. Use u and i to move the highlighting to the enlarge-

ment size you want to use and then press SET.

ASa

3. Input up to 16 characters of text, and then press SET.

4. Specify the print direction (page E-17) and either mirror

or normal printing (page E-17).

• Use u and i to move the highlighting between items,

and t and y to change each setting.

5. After making the settings you want, press SET.

–––

TIXE

c3.82

6. Use u and i to move the highlighting to “PRINT” and

then press SET to execute it.

7. Use u and i to move the highlighting to “EXIT” and

then press SET.

8. Press SET to end the operation.

BAR CODE

With this item, you can print any one of seven different types

of bar codes: EAN-13, EAN-8, UPC-A, UPC-E, ITF,

CODE39, CODABAR.

Important! The procedure you use to print a bar code de-

pends on the type of bar code you select.

Bar Code Tape

Only the following types of tape should be used for printing

bar codes.

• Black on white tape (WE)

• Blue on white tape (WEB)

• Black on yellow tape (YW)

Important!

• You cannot use 6mm tape to print bar codes.

• You can input up to 60 characters as comment text when

using 18mm/24mm tape. You cannot input comment text

with 9mm and 12mm tape (the comment input screen will

not appear). If you do not want to input comment text,

press SET without inputting anything.

• Always test bar codes produced using this label printer

before actually using them. If bar codes cannot be read

properly, try adjusting the print density (page E-18) or us-

ing a larger character size.

EAN-13, EAN-8, UPC-A, UPC-E

The following applies to EAN-13, EAN-8, UPC-A, and UPC-

E bar codes.

To print a bar code

1. While the PRESETS menu is on the display, use u and

i to move the highlighting to “BAR CODE” and then

press SET.

2. Use u and i to move the highlighting to “NEW” and

then press SET.

–––

–

3. Use u and i to move the highlighting to the type of bar

code you want to print and then press SET.

ASa

• This display appears only if you are using 18mm/24mm

tape. If you are using different tape, skip to step 5.

4. Input up to 60 characters of comment text if you want,

and then press SET.

5. Input the bar code’s data and then press SET.

6. Use u and i to move the highlighting to the size you

want to use and then press SET.

–––

TIXE

7. Use u and i to move the highlighting to “PRINT” and

then press SET to execute it.

8. Use u and i to move the highlighting to “EXIT” and

then press SET.

9. Press SET to end the operation.

ITF, CODE39, CODABAR

The following applies to ITF, CODE39 and CODABAR bar

codes.

To print a bar code

1. While the PRESETS menu is on the display, use u and

i to move the highlighting to “BAR CODE” and then

press SET.

2. Use u and i to move the highlighting to “NEW” and

then press SET.

3. Use u and i to move the highlighting to the type of bar

code you want to print and then press SET.

–––

–

4. Use u and i to select “YES” (use check digit) or “NO”

(do not use check digit) and then press SET.

• This display appears only if you are using 18mm/24mm

tape. If you are using different tape, skip to step 6.

5. Input up to 60 characters of comment text if you want,

and then press SET.

6. Input the bar code’s data and then press SET.

7. Perform steps 6 through 9 under “To print a bar code” of

“EAN-13, EAN-8, UPC-A, UPC-E”.

General Bar code Operations

The following procedures apply to all bar code types.

To store a bar code

1. Perform the required steps to create the bar code so the

following is on the screen.

2. Use u and i to move the highlighting to “STORE” and

then press SET.

3. Input up to five characters for the name of the bar code,

and then press SET.

4. Press SET to store the bar code or ESC to abort the

operation without storing anything.

5. Use u and i to move the highlighting to “EXIT” and

then press SET.

6. Press SET to end the operation.

To recall a bar code from memory

1. While the BAR CODE menu is on the display, use u

and i to move the highlighting to “RECALL” and then

press SET.

2. Use u and i to display the name of the bar code you

want, and then press SET to recall it.

3. Now you can make changes in the bar code and print it

or store it as a new bar code.

To delete a bar code from memory

1. While the BAR CODE menu is on the display, use u

and i to move the highlighting to “DELETE” and then

press SET.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 30 31

Commentaires sur ces manuels

Pas de commentaire

Casio KL-8100 Guide de l'utilisateur Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimer et scanner Casio KL-8100