Casio EA-100 Command Tables Manuel d'utilisateur télécharger pdf (Page 6)

Appendix B: Command Tables

Command 5 - DATA RANGE SETUP

∗1 0, 1, and 2 is filtered data only when Command 3 specifies filtering.

∗2 0 selects the final sample.

Command 6 - MULTIMETER MODE SETUP

Set / Reset Channel Select Operation

0 Returns to the Communications Mode * 1 Channel 1 (CH1) * 1 Auto-ID

* 1 Enters the Multimeter Mode 2 Channel 2 (CH2) 2 Voltage (±10V)

3 Channel 3 (CH3) 3 Current

4 Resistance value

5 Period

6 Frequency

4 SONIC channel * 1 Auto-ID

2 Meters

3 Feet

5 DIG IN channel —

Channel Select Data Select Data Begin Data End

* 0 Current send channel * 0 Raw data (Filtered data when data filtering is on.) 1 to 512 0 to 512

1 Channel 1 (CH1 - analog channel) 1

d/dt (Filtered data when data filtering is on.) (default = 1) (default = 0)

2 Channel 2 (CH2 - analog channel) 2

d /dt (Filtered data when data filtering is on.)

3 Channel 3 (CH3 - analog channel) 3 Raw data (Filter setting is ignored.)

4 Channel 4 (SONIC channel) 4

d/dt (Filter setting is ignored.)

5 Channel 5 (DIG IN channel) 5

d /dt (Filter setting is ignored.)

6 Recorded time data

∗1

1 2 3 4 5 6

Pas de commentaire

Casio EA-100 Command Tables Manuel d'utilisateur Page 6